Tuesday, May 16, 2023

1953 Raleigh Lenton

 

I rebuilt this 1953 Raleigh Lenton over the second half of the winter and start of this past spring. This is a Reg Harris model with Reynolds 531 main tubes. The frame is a 23 inches and wonderfully light in weight. It has the ornate lugs and a very nice green finish with white/silver type stripes.

 

This bike started life as a road model and at some point in the distant past was converted to an upright utility type configuration. As a utility type bike, it's very light and quite a lively rider. 

 

The wheels are 26 x 1 1/4 (AKA 597mm, 650) endrick rims - Dunlop Special Lightweight steel type. The hubs are a basic Raleigh steel front and a 1953 Sturmey AW rear. 

 

The bike originally came with celluloid Raleigh fenders in the style of Bluemels. Like so many other sets of old, celluloid fenders, the ones with this bike were wipes out long ago. I replaced them with a nice set of chromed steel Raleigh fenders. They're a little heavier, but much more durable.

 

This bike is quite lively, and a lot of fun to ride (think Raleigh Sports, but sportier).  

 

The previous owner opted to add an aluminum Raleigh Industries kickstand. Kickstands were very popular in the US as a means of parking the bike. The stand is a 1950s era stand, so it probably was added very early in the bike's life. I re-added the stand, but used rubber padding to prevent it from injuring the chain stays. I think it's sufficiently old and has become part of the bike's history.

 

 

The pump is an aluminum Raleigh pump from a 1960s era Raleigh Sports. This bike also has some attractive, period decals on the frame.I like the silver lettering and the lightning bolts - a change of pace from the also nice, more conservative Raleigh Sports type transfers of that time.

I still have some final tinkering and set up, but this project is mostly done. It should be a good addition for the coming warm weather.

In a few places, I used clear heat shrink to reinforce and "bandage" small cuts in the vintage cable housings. These creme colored housings are from a 1960s Raleigh Sports, but the color works nicely with the green frame. Heat shrink can be an effective bandage if you want to save period cable housings that are a little damaged, but still functional. The clear heat shrink is visible up close, but from a distance, you won't even notice it. 













Friday, May 12, 2023

A Brief Defense of Older "Schwinn Approved" Parts

 In vintage bicycle repair circles, it is fairly common to see the lampooning of "Schwinn Approved" parts, such as brake levers, calipers, bells, grips, generators,, and other bike parts. But this kind of general ridicule is undeserved, particularly as to older Schwinn Approved parts made prior to the late 1960s.

First, we have to consider the period in which the Schwinn Approved label appeared. While it is true that the Schwinn Approved parts had a marketing aspect to ensure people bought parts that would bring a profit to Schwinn, it also provided consumers with some understanding that they were getting parts that would function on their bikes, and that had some basic standard of quality. 

Take the old Weinmann brake levers and calipers, for example. The Schwinn Approved levers and the Weinmann 810 calipers on the 3-speed bikes were lightweight, could be repaired, and functioned as well (or in some cases much  better) than the basic calipers of the 1950s-60s. Replacement bits for the calipers were readily available and a competent mechanic would service and set up the calipers. 

 While these brakes were not the only options for the bikes, the Schwinn Approved label did provide a common touchstone for function, fit, and quality for the consumer and mechanic in the days prior to the internet. We often tend to forget that information, opinion, and comparison of parts flows much more freely with the internet today than it did in the days of local bike shops 60+ years ago.

And then there are the Schwinn Approved finger grips. These grips are often durable and comfortable. I have a set of grips on my 1964 Schwinn Traveler that have aged incredibly well, and are still supple and comfortable 59 years later. While not all grips weathered this well, many are still in circulation and can be used. Not bad for a part in a family of components that often is the butt of jokes among vintage bike enthusiasts.

It is fair to admit that some (though not all) of the later Schwinn Approved parts from the Far East from the late 1960s and 1970s were lacking in quality. This tends to be true of some of the generator sets, bells, and other peripherals. However, even some of these later and cheaper parts, such as Dia Compe brakes, were not bad and could be a cost-effective option.

It is somewhat cynical today in thinking that Schwinn Approved was just a gimmick or a marketing ploy. True, it did have a marketing aspect, but it also provided the consumer and mechanic with a way of identifying and sourcing parts for Schwinn bikes in a reliable way in a time when fewer parts and less knowledge was available in many places in America.

And we must credit Schwinn for its attempts to bring bike shops "upscale" in the post-war era as part of all of this. Schwinn's concept of a clean, tidy bike shop akin to other middle class retail stores of the 1950s and 1960s helped make many American baby boomers and their parents more familiar with bikes and shops, laying the foundation for the bike boom that was to follow.

Sunday, May 7, 2023

1949 Raleigh Clubman - New Arrival

 Here is a recent arrival in my collection: a 1949 Raleigh Clubman. The Clubman was a premium sporting model made by Raleigh shortly after WWII ended. I think this bike will make a great companion to the 1953 Raleigh Lenton that I recently rebuilt.

 


This 1949 model features  26 x 1-1/4 (597mm) Dunlop wheels, Sturmey Archer hubs, and a frame with ornate lugs and Reynolds 531 main tubes. The paint has some wear, but no signs of abuse. I suppose this is what you would call, "good, honest wear". The frame is an "in-between" type at 22 inches (compared to the usual 21 or 23 of the more common Raleigh Sports). 

The handlebars and stem have been swapped, and it has a replacement front brake cable. The tires are Schwalbe 26 x 1-1/4,which are periodically available in Britain, but which never seem to be in stock in the USA. The bike has shop stickers from a bike shop in Milwaukee, Wisconsin.

 

These Bluemels aluminum fenders are from a later model Raleigh, but I got the originals with the bike. I place to clean up the originals and put them back on this bike. 


 

The bike came with a wonderful "Raleigh" branded saddle bag, which I think goes great with this bike.

 


 The lighting system is the classic "Dynohub" type, with the fork-mounted headlamp. It has been converted to LED bulbs already, which I think is a great addition for safety's sake.

It has the old school fluted, Raleigh cranks, which I think are elegant and add a nice touch to these bikes.

 I previously owned a 1951 Clubman, which had 27 x 1-1/4 wheels. This earlier model is the 26 inch wheel version.

This bike will require a cleaning and overhaul. I'll probably play a little with the handlebar set up so that it fits me a little better. But this looks to be a promising project.