My area is currently enjoying some decent weather. This week has been relatively nice, with temperatures in the 70s each day. It will be rainy over the next day or so, but hopefully will improve again after that.
I did make a small change to the bicycle: I put a lower profile kickstand on the bike, to prevent the cranks from rubbing on the kickstand arm. I put a Raleigh-type English kickstand with a low profile leg onto the bike, and that added a little clearance between the kickstand and the crank arm.
If you're wondering what that extra clamp is on the non-drive side chain stay, it is a "strike plate" to prevent the previous kickstand leg from banging and chattering against the frame. I am not sure if the strike plate will stay. I may not need it with the Raleigh-type stand (the leg seems to be under much less spring tension).
Saturday, April 16, 2016
Now that the weather is warming up in full, I can bring out some of the oldest bikes I have. The 1940 Westfield is a fairly primitive roadster: single speed coaster brake, bell, and Philco handbrake unit on the front. The Philco is actually an upgrade the original owner made back in the day.
The Philco unit is interesting because it lets you add a front hand brake to almost any bike. It is something of a hybrid between a center pull caliper and cantilever brakes. It actually functions smoother and better than it looks.
However, it is quite heavy and has peculiar means of adjusting pad spacing and angle. I did put fresh pads in: modified Kool Stop pads. I used a Dremel to get the correct dovetail for the pad holders. It's an interesting part from the days when you could just add a handbrake to a bike that otherwise might not be able to take one because of a lack of brake bolt hole in the fork.