Reference Guides:

Saturday, August 18, 2018

1958 Raleigh Sports: 60 Years of Quality


My Raleigh Sports 4-speed dates to 1958. The late 1940s through the early 1960s were the "golden age" of Raleigh. This was when Raleigh bikes had many high-quality touches, and finishing was at its best. Over the course of the 1960s, cost-cutting diminished some of the "posher" touches on the bikes. A 1970s-era Raleigh Sports might certainly be a reliable, attractive bike, but the 1940s-early 60s bikes had another level of finishing and fitting.

I love this 1958 Raleigh Sports, and here are a few, detailed shots of the nicer touches on the bike.



The heron head crank set has a 48-tooth sprocket. The heron bird figures in the chain ring have "eyes" and face front. The chain ring has the "inverted-V bridges" between the herons.

The rear fender decal has held up pretty well. These often get worn or damaged.

This "plain-style" headbadge is a nice, vintage touch. 

The Sports has an FW 4-speed hub, and the shifter to match.

There are a few scratches here and there, but the condition on this bike is pretty good. Even those little "Raleigh" heron graphics on the fork blades are intact.

Talk about "overkill" - the seat tube has a full rack of graphcs: "High Tensile Steel Tubing"; "Genuine English Lightweight"; and my favorite, "The All-Steel Bicycle".  Nobody brags about "all steel" anymore... I doubt buyers would pay good money for heavy, steel rims these days.

Here's a killer extra - a Raleigh Industries original bell, complete with the Raleigh Industries logo in the center of the bell. This isn't your typical, "$5 made-in-China" plastic bell for sure.

Even the brake lever straps are rounded, well-plated, and have received the "Raleigh Industries" strike. Think about that a moment - the clamp on a brake lever fully finished; struck; and plated in chrome. Raleigh spared few expenses on these "golden age" bikes.

Monday, August 13, 2018

Deep into August

Over the course of July and the first half of August, our weather has been pretty rotten. I've gotten in a good number of rides, but we've had an almost-daily threat of rain, often pouring rain.

The odd thing is that it has been dry more than it has been raining, but even on the dry days, the rain is never very far away. This has resulted in prolonged paving (torn-up) roads in the area, and several rides I had to cancel.

Tonight though, I was happy to squeeze in an evening ride on my 1974 Raleigh Sports. There was plenty of rain in the area, but it stayed just to the north of here. It was pouring 10 miles north here, yet my local area stayed dry.




One item unique to this bike is the U.K. flag lapel pin. I bought this simple pin at a local mall 15 years ago this past spring. It originally was on the back of my backpack in college, but once I got this Raleigh in September 2003, I added the lapel pin to the saddle bag.


 

It's hard to believe I've had this bicycle almost 15 years. This one is a sentimental favorite of mine, even if it's not the highest collector cachet bike that I have.

Saturday, August 11, 2018

Cleaning Bicycle Fender/Mudguard Wells (Wheels on)

Crews have been busy re-paving our local roads, taking some these roads down to the dirt bed. Other roads are newly re-paved and are in excellent condition. The result is that I've been spending quite a bit of time on my Raleigh Export Model DL-1. The DL-1's robust construction and large, 28 inch wheels handle many road surfaces without too much difficulty.


But part of riding on dirt bed is that you inevitably get mud deep into the fender/mudguard wells. And it's a pain to remove the wheels on this bike... Below you can see plenty of  dust on the outside of the fender, and there's caked mud on the tire.


Caked mud on the tire is a fairly good indicator you probably have mud on the inside of the fender well. The English called these "mudguards" because that's exactly what they do - stop mud and water from being kicked up on the rider and the rest of the bike. I love fenders, but they do need a little cleaning now and then.


Did you know that you can give your fender wells a good cleaning without removing the wheels, at least most of the time?

I "quick clean" my fender wells using a rag or paper towel and an old bicycle spoke. First, the rag can be loaded up with soapy water, WD-40, Kroil or other cleaning solutions. In this case, I'm using WD-40 because it both cleans and displaces any moisture.

Second, I work the rag into the fender well and position the spoke head in the rag so that it's only touching the rag - not punching through the rag or in any way contacting the fender well paint.


Finally, I work the rag around the fender well using the spoke head as a hook to pull/push the rag. The wheel/tire can also be helpful to push the rag in which ever direction you want to go. If the rag is properly "stuffed" into the well - it will contour its shape to the well and clean out the various crevices.


I do this treatment perhaps once per season on each bike, and maybe a little more often if the fender wells have gotten particularly muddy like this DL-1's have become. Also nice is the fact that you can choose what you want to use by way of cleaner - soapy water, WD-40, Kroil, and similar can be employed. Just avoid paint thinner, acetone, and similar solvents that will damage the paint.

What if you don't want to go all the way to a "hook and rag" method - because you've got some loose debris, but not mud "caked" or "stuck" to the well? Often this will be grass clippings, pieces of plants, or other "loose items" you've picked up in the fender well.

In that case, you can use either canned "electronics cleaning" air, or an air compressor to simply blow out the debris. This is fast, effective, and involves no chemicals. This is the way to go if you just have a few loose pieces in the fender, and not the "caked mud" I picked up from riding on the road bed.


After the riding season is over, I assess each bike to see what cleaning need to be done. If need be, I pull the wheels and completely clean the bike's fenders and hard-to-reach areas.

But during the season, these "quick clean" methods work well.